私人扫雷群二维码

details

HomeInverter knowledgeFrequency Inverter Safety: Contactors on input vs. output

Frequency Inverter Safety: Contactors on input vs. output

What are the general rules for safeguarding machinery incorporating motors driven by frequency inverters? For example, should the contactors be on the input or the output?

A contactor on the input of the frequency inverter rather than the output is preferred, although on can make the case for one on the output.

Putting a contactor on the output of the frequency inverter will assure immediate removal of voltage from the motor which is what you want. On the other hand, some inverters are easily damaged by switching on their output and that it's possible that the motor could be reconnected to the output of an inverter that was operating above zero frequency and this could also damage the inverter. (Effectively a direct (non-soft) or full-voltage start on the output of a frequency inverter)

Placing the contactor on the input of the inverter would shut off all power to the motor, but there could be a small delay due to the energy stored in the capacitors in the frequency inverter power supply. This would be safe, would not damage the inverter and would prevent direct-online switching on the output of the frequency inverter. The inverter would always start from zero when the contactor was re-closed. You may have to reset an under-voltage trip on the inverter, but that may be automated if required. You may also use soft starts between the frequency inverter and the motor.

私人扫雷群二维码you may like:

inverter serviceHigh quality frequency inverters for electric motor speed controls in energy-saving solutions.

category

inverters

featured

recent

最新扫雷群二维码-免押 微信红包二维码扫雷群 3-10元扫雷群二维码 2020微信红包真实扫雷群 5块钱微信扫雷群免押金